央视CCTV《工匠精神》入选品牌、bob游戏平台 十大品牌——bob软件是什么 欢迎您的到来!

400-826-3533

手机版微信小秘书天猫旗舰店 京东旗舰店网站地图

bob游戏平台 常见故障的排除

Elimination of Common Faults of Radiator

2016-12-29

Switch to English

1、散热器主体局部不热:

主要集中在下进下出的安装方式上,原因为散热器内部有气体不能排出。
解决方式为将排气阀开启,将散热器内部气体排出。
或检查系统是否压力过小或流量过低。

2、散热器整体不热:

下进下出的安装方式,检查散热器安装时是否将导流阀上下位置安装颠倒;
上进下出的安装方式,检查散热器安装时是否未将流阀开启。或者是系统否存在问题。

3、散热器有水声:
主要集中在上进下出的安装方式上,原因为散热器内部有气体不能排出。
解决方式为将散热器供水阀门关闭,将排起阀开启,将散热器内部气体排出,
关闭排气阀,将供水阀门开启即可。
如不能排除应检查系统是否流量过低或系统循环水含气量过大。

4、散热器震动:

检查散热器挂件是否松动,如挂件未松动应检查系统上是否存在震源导致散热器共振。

1.Radiator body is not hot:

Mainly concentrated in the next way into the next installation, the reason for the radiator inside the gas can not be discharged.

The solution is to open the exhaust valve, the radiator internal gas discharge.

Or check the system is too low pressure or flow is too low.

2.Radiator as a whole is not hot:
Down into the next installation, check whether the installation of the radiator up and down position of the diversion valve installed upside down;

Up and down the installation method, check whether the installation of the radiator flow valve is not open. Or whether there is a problem with the system.

3.Radiator sound of water:

Mainly in the upper and lower out of the installation, the reason for the radiator inside the gas can not be discharged.

The solution is to close the radiator water supply valve, the discharge valve will open, the radiator internal gas discharge,

Close the exhaust valve, the water supply valve can be opened.

If you can not rule out the system should check whether the flow is too low or the system circulating water gas content is too large.

4.Radiator vibration

Check the radiator pendant is loose, such as the pendant is not loose should check the system on whether there is a source of heat sink resonance.